| Model |
Verti-Drain 7212 |
| Working width | 48” (1.20 m) |
| Working depth | Up to 10” (250 mm) |
|
Tractor speed@500 rev’s at PTO |
|
| PTO speed: (max) | Up to 500 rpm |
| Weight | 1,030 lbs (470 Kg) |
| Hole spacing side-to-side |
4” (100 mm) @ 3⁄4” (18 mm) holes |
| Hole spacing in driving direction | 1” - 6 1⁄2” (25 – 165 mm) |
| Recommended tractor size |
18 HP with lift capacity of minimum 1,250 lbs (570 Kg) |
|
Capacity (maximum) |
- |
| Shipping dimensions |
54” x 32” x 44” (1.35m x 0.8m x 1.1m) |
| Maximum tine size |
Solid 3⁄4” x 10” (18 x 250 mm) |
| Three point linkage | 3- point CAT 1 |
| Transmission oil | Life time grease EP 00 |
| Lubrication grease | EP 2 |
| Standard items |
Set solid tines to 1⁄2” x 10” (12mm x 250mm) |
| FEATURE | BENEFIT |
| Unique adjustable parallelogram forced heave |
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring |
| 3-speed gearbox | Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential |
| Sealed bearings not bushings | Long maintenance free life |
|
Higher working speed |
Greater working capacity |
| Useable playing surface | Aerate at any time without interruption to play |
| Simple tine design | Easy to change and cheap to replace |
| 10” (250 mm) penetration | Relief of compaction, removing any hard pan of at depth up to 10” (250 mm) |
| 1⁄2” (12 mm) or 3⁄4” (18 mm) solid & hollow tines |
Choice of tines for varying conditions |
| 2 1⁄2" (65 mm) spacing between 1⁄2" (12 mm) tines |
High density of aeration |
| Redexim Charterhouse Inc. • 950 Sathers Drive • Pittston Township, PA 18640, USA Tel:     570-602-3058 • Fax: 570-602-3060 • E-mail: redexim@aol.com |
|