VERTI-DRAIN 7215


Model	Verti-Drain 7215
Working width	61” (1.56 m)
Working depth	Up to 10” (250 mm)
Tractor speed@500 rev’s at PTO Spacing 2 1⁄2” (65 mm) Spacing 4” (100mm) Spacing 6 1⁄2” (165mm)	Up to 0.60 mph (1.00 km/h) Up to 1.00 mph (1.50 km/h) Up to 1.60 mph (2.50 km/h)
PTO speed: (max)	Up to 500 rpm
Weight	1,210 lbs (550 Kg)
Hole spacing side-to-side	4” (100 mm) @ 3⁄4” (18 mm) holes 2.5” (65 mm) @ 1⁄2” (12 mm) holes
Hole spacing in driving direction	1” - 6 1⁄2” (25 – 165 mm)
Recommended tractor size	25 HP with lift capacity of minimum 1,540 lbs (700 Kg )
Capacity (maximum) Spacing 2 1/2” (65 mm) Spacing 4” (100mm) Spacing 6 1/2” (165mm)	- Up to 16,813 sq ft (1,563 sq m)/ hour Up to 25,866 sq ft (2,404 sq m)/ hour Up to 42,678 sq ft (3,966 sq m)/ hour
Shipping dimensions	69” x 32” x 44” (1.7m x 0.8m x 1.1m)
Maximum tine size	Solid 3⁄4” x 10” (18 x 250 mm) Hollow 1” x 10” (25 x 250 mm)
Three point linkage	3- point CAT 1
Transmission oil	Life time grease EP 00
Lubrication grease	EP 2
Standard items	Set solid tines to 1⁄2” x 10” (12mm x 250mm) Front and rear roller 3- shuttle gearbox


FEATURE	BENEFIT
Unique adjustable parallelogram forced heave	Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearbox	Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushings	Long maintenance free life
Higher working speed	Greater working capacity
Useable playing surface	Aerate at any time without interruption to play
1⁄2” (12 mm) or 3⁄4” (19 mm)solid or hollow tines	Choice of tines for varying conditions
Redexim Charterhouse Inc. • 950 Sathers Drive • Pittston Township, PA 18640, USA Tel: 570-602-3058 • Fax: 570-602-3060 • E-mail: redexim@aol.com