VERTI-DRAIN 7416


Model	Verti-Drain 7416
Working width	64” (1.60 m)
Working depth	Up to 14” (350 mm)
Tractor speed@500 rev’s at PTO Spacing 2 1⁄2” (65 mm) Spacing 5” (130 mm) Spacing 7 1⁄2” (195mm)	Up to 0.55 mph (0.85 km/h) Up to 1.10 mph (1.75 km/h) Up to 1.60 mph (2.60 km/h)
PTO speed: (max)	Up to 500 rpm
Weight	1,914 lbs (870 Kg)
Hole spacing side-to-side	5” (130 mm) @ 3⁄4” (18 mm) holes 2.5” (65 mm)@ 1⁄2” (12 mm) holes
Hole spacing in driving direction	1” - 7 1⁄2” (25 mm – 195 mm)
Recommended tractor size	35 HP with lift capacity of minimum 2,310 lbs (1,050 Kg)
Capacity (maximum) Spacing 2 1/2” (65 mm) Spacing 5” (130 mm) Spacing 7 1/2” (195mm)	- Up to 14,921 sq ft (1,387 sq m)/ hour Up to 29,841 sq ft (2,773 sq m)/ hour Up to 44,762 sq ft (4,160 sq m)/ hour
Shipping dimensions	68” x 32” x 48” (1.7m x 0.8 m x 1.2 m)
Maximum tine size	Solid 3⁄4” x 12” (18 mm x 300 mm) Hollow 1” x 10” (25 mm x 250 mm)
Slip clutch setting PTO	Maximum 4,400 lb inch (500 Nm)
Three point linkage	3- point CAT 1
Transmission oil	Life time grease EP 00
Lubrication grease	EP 2
Standard items	Set solid tines to 1⁄2" x 12” (12mm x 300mm) Front and rear roller 3- shuttle gearbox


FEATURE	BENEFIT
Unique adjustable parallelogram forced heave	Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearbox	Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushings	Long maintenance free life
Simple tine design	Easy to change and cheap to replace
1⁄2” (12 mm) or 1” (25 mm) solid & hollow tines	Choice of tines for varying conditions
Redexim Charterhouse Inc. • 950 Sathers Drive • Pittston Township, PA 18640, USA Tel: 570-602-3058 • Fax: 570-602-3060 • E-mail: redexim@aol.com